LestaUSA Self Learning Finishing Robot at DSW-min
PERFECTLY CONTROLLED LIQUID COATING SPRAY

 

Nitrotherm Integrated by DeGeest Logo

 

Get control of your paint delivery, regardless of season and temperature.

Nitrotherm Spray® is a patented liquid spray technology system by Eurosider and integrated by DeGeest that works with your existing manual or robotic equipment with any kind of paint.

Nitrotherm Spray replaces conventional compressed air with heated, ionized nitrogen as the spray carrier. Nitrogen is cleaner, dryer, and atomizes more effectively. Ionization is added to improve transfer efficiency.

By continuously heating the temperature of the nitrogen, your paint becomes more fluid which reduces orange peel. You’ll also see unprecedented control over the coating process for a better quality finish with significant savings.


Generate Up to 30% Savings In Paint

  • Reduces overspray and rebounding
  • Lessens booth maintenance and delivers up to 4x your filter life
  • Provides cleaner and safer working environment
  • Minimizes solvent use and VOC up to 50%

Reduces Application Time By 30-40%

  • Decreases flash and cure times
  • Improves atomization of spray
  • Provides easy “wet on wet” application with consecutive application of 2 or more coats
  • Delivers consistent performance regardless of time of day or season

Increases Transfer Efficiency

  • Reduces overspray through ionized nitrogen
  • Delivers uniform thickness and higher gloss with less viscosity of paint
  • Decreases haze and streaks
  • Reduces runs, sags, and orange peel

 

HEATED, IONIZED NITROGEN AS THE SPRAY CARRIER

LestaUSA_Nitrotherm_34192_TurbulentVsCalmedFlow_1280LowerRes_v01

 

LestaUSA_Polifluid_34191_FilteredToProduceNitrogren_v02

 

LestaUSA_Nitrotherm_34192_ConventionalCompressedAir_1280LowerRes_v01

 

 

LestaUSA_Nitrotherm_34192_PaintingWithNITROTHERM_1280LowerRes_v01

REDUCE OVERSPRAY AND REBOUNDING

 

Nitrotherm

What It Is
Patented liquid spray technology that replaces conventional compressed air with heated, ionized nitrogen as the spray carrier.

Why You Need It
Helps get more control over paint delivery, regardless of season or temperature. Generates up to 30% savings in paint and reduces application time by 30-40% to produce more parts.

How It Works
Works with existing manual or robotic equipment with any kind of liquid paint by using nitrogen which is separated from compressed shop air, heated, ionized and used to atomize the liquid being sprayed. This combination eliminates common liquid system variables by creating constant temperature control while gaining superior wrap on parts.

 

Nitrotherm-Product-Sheet

 

Did You Know?
With Nitrotherm you can save 30% in paint and gain superior wrap on parts. Learn more about Nitrotherm.

Download  >

Listen to Our Podcast

The Secret Weapon in Liquid Finishing Technology is Nitrotherm®️

Manufacturing a Stronger Standard kicked off a new series of podcasts, titled “What’s New in Finishing Technology,” with a discussion on Nitrotherm®️ a patented technology by Eurosider. This liquid spray-painting method utilizes nitrogen instead of normal compressed air. Derek DeGeest, President of DeGeest Corporation & Lesta USA, and Bill Robinson, President of Coating Delivery Technology, spoke about the benefits of Nitrothem, which reduces solvent consumption reduction of VOC emissions by up to 50% and provides manufacturing cost savings.

BETTER QUALITY FINISH WITH SIGNIFICANT SAVINGS

Not Your Typical Robot

There are two ways Lesta robots automate the finishing process so you can increase capacity without hiring. In a weightless self-learning mode, the robot duplicates the precise movements of your best painter and repeats them on future parts. Or, it can be programmed using scanning to paint panels, drawers, boxes and doors.


How it works  >

Robotic Painting & Finishing On Day One

Unlike most robotic painting & finishing systems, Lesta robots do not require complicated programming or teach pendants. It’s so easy that, following installation, you can be painting & finishing robotically on Day One.


Our Integration Center  >

Any Size, Any Job

Built for industrial painting & finishing applications, Lesta robots are perfect for any size company applying liquid or powder coating on metal, wood or composite materials.


Proven European Design  >

Experience it yourself

See this game-changing technology in the LestaUSA showroom inside DeGeest Corporation near Sioux Falls, South Dakota.

Call, email or fill out the form below to schedule an appointment.

Call Us

1-888-546-2800

Email

robotics@lestausa.com

Contact Us

NITROTHERM® SMART SOLUTIONS